When Metal Meets Metal (Wheel Bearings)

Posted October 13, 2019 10:23 AM

What part of your vehicle has little metal balls inside that are lubricated and allow you to cruise on down the road?  They are wheel bearings, and automotive designers might argue they are human beings' second greatest invention of all time (the first is, of course, the wheel!).

You have a wheel bearing at each wheel.  They allow your wheels to turn freely, minimizing friction that would ordinarily slow you down when metal meets metal.  When one of your wheel bearings starts to go bad, it lets you know. A wheel bearing does its work quietly when it's in good health but starts getting noisy when it isn't.  People describe the noise differently.  Sometimes it sounds like road noise, a pulsating, rhythmic, sound.  That pulse speeds up when your vehicle speeds up. 

Here's what's happening when you hear that sound.  As mentioned, the bearing has these little metal balls inside a ring.  They have a lubricant inside to reduce friction between the balls; modern wheel bearings are sealed and they're intended to do their job without any maintenance. 

Wheel bearings take a beating; you hit some rough potholes or go over some uneven railroad tracks. Sometimes water can get into a bearing and reduce the ability of the lubricant to do its job.  Time starts to take its toll, too. When the lubricant isn't reducing friction like it should, the bearing can heat up. One of those little balls can start shedding pieces of metal and soon those shards start grinding up the other balls.  Friction takes over and soon your wheel isn't turning smoothly. That's what's causing the sound.  If a wheel bearing is not fixed, it could eventually seize up completely, and you can be stranded.

It's a lot easier if you heed the early warning signals, that pulsating noise.  Now, sometimes a similar noise can be caused by a bad tire, but in either case, it's important to have it checked out. Our Corporate Autoworks technicians will be able to tell you fairly quickly what the problem is and offer a solution.

Wheel bearings generally don't fail often and usually last from 85,000-100,000 miles/140,000km to 160,000km. But consider them a long-term maintenance item that, once fixed, will keep you heading smoothly to the next destination.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com



Search



Archive

July 2016 (19)
August 2016 (5)
September 2016 (4)
October 2016 (4)
November 2016 (5)
December 2016 (4)
January 2017 (5)
February 2017 (4)
March 2017 (4)
April 2017 (5)
May 2017 (3)
June 2017 (5)
July 2017 (5)
August 2017 (3)
September 2017 (3)
October 2017 (5)
November 2017 (4)
December 2017 (3)
January 2018 (5)
February 2018 (4)
March 2018 (4)
April 2018 (5)
May 2018 (3)
June 2018 (4)
July 2018 (5)
August 2018 (4)
September 2018 (5)
October 2018 (4)
November 2018 (4)
December 2018 (5)
January 2019 (5)
February 2019 (4)
March 2019 (5)
April 2019 (4)
May 2019 (4)
June 2019 (5)
July 2019 (4)
August 2019 (4)
September 2019 (5)
October 2019 (4)
November 2019 (3)

Categories

Air Conditioning (4)Alignment (6)Alternator (1)Auto Safety (2)Automotive News (4)Battery (4)Brake Service (1)Brakes (5)Cabin Air Filter (4)Check Engine Light (1)Cooling System (8)Diagnostics (5)Did You Know (2)Diesel Maintenance (1)Differential Service (1)Drive Train (5)Emergency Items (1)Exhaust (3)Fluids (6)Following Recommended Intervals (2)Fuel Economy (5)Fuel System (23)Headlamps (1)Inspection (3)Keys to a long lasting vehicle (4)Maintenance (32)Monitoring System (3)Oil Change (1)Older Vehicles (1)Parts (3)Safety (3)Serpentine Belt (1)Service Intervals (4)Service Standards (3)Shocks & Struts (2)Steering (5)Suspension (1)Timing Belt (3)Tires and Wheels (24)Transmission (2)Warranty (1)What Customers Should Know (5)Wheel Bearings (1)Windshield Wipers (2)