What is a TSB? (Technical Service Bulletins)

If your vehicle had something in its design or production that the manufacturer had figured out had an unanticipated problem, you'd want to know about it. And you'd want it fixed. There is something that can help drivers with just such a scenario. It's called a Technical Service Bulletin, or TSB.

Here's what a TSB is. Vehicle design and manufacturing is a very complex process. Aftrer every vehicle is introduced, the more units there are on the road, the more likely weaknesses in parts or design will start to show up.

Automakers gather data on the issues and how best to fix them. Then they send out TSBs (usually in the first year of the new model) so technicians will know to look for those problems and what to do about them. There may be more than one cause of a problem with a vehicle so there may be more than one TSB for an issue.

A TSB can be issued for anything from failing water pumps to strange noises to smelly headliners. A TSB and a recall aren't the same thing. A recall is issued if there's a problem that could cause harm to people or if it creates illegal emissions. The manufacturer pays for a safety defect to be fixed, and the repair is usually performed at a dealership.

But when a Technical Service Bulletin is issued, it's because there's a pattern of some system not working the way it should. If a vehicle is under warranty and the problem can be diagnosed in a specific vehicle, the manufacturer will probably pay for the repair. But there may be limits. Take one case with certain models of a minivan. Some wheel bearings were failing prematurely, so the manufacturer extended the warranty on them to 5 years or 90,000 miles/145,000 km. After that, the owner bore the cost. In some cases, a manufacturer will reimburse owners for a repair already done at an independent service facility.

You may have a vehicle that is no longer covered by a warranty but a TSB has been issued for a certain problem. In that case, any service facility can perform the service. At Corporate Autoworks, your service advisor will have access to TSBs that have been issued for your vehicle's year and model. They will help the technician diagnose it if your vehicle has the issue. The TSB will also have advice for the best repair procedure to get your vehicle working the way it should.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com

Talk to Corporate Autoworks About New Shoes for Your Vehicle

Custom wheels are one way that Burlington folks express themselves and personalize their vehicle. But they aren't as cheap and easy as sticking decals on your back window. There are several factors that need to be considered, including cost, the fit of the wheel, modifications that will have to be made to the vehicle, how the new wheels and tires will affect the operation of the vehicle, your driving habits and, of course, the style of the wheels. Most Burlington drivers start with the last factor: the style of the wheels. But that should be the last thing we choose.

When considering custom wheels, you should first carefully consider your budget. Some wheels may require adjustments to your vehicle suspension system, brakes, or traction systems. You need to know what you can afford before you start shopping or get your heart set on a particular type of wheel.

There are three basic ways you can change your wheels. First, you choose a wheel that is already the same size as the ones on your vehicle. Second, you can choose larger wheels and third, you can choose smaller wheels. Mounting wheels that are the same size as the ones already on your car sounds easy enough. But even though the wheel may be the same diameter as your current wheels, that doesn't mean it will fit your vehicle. Besides diameter, wheels also have an offset. This is the measurement from the inside edge of the wheel to the point at which it bolts on. If your new wheel does not have the same offset as your current wheels, your vehicle tires can rub on the inside or outside of the wheel well. This can lead to blowouts, uneven tread wear and other mechanical problems.

The tire and wheel professionals in Burlington at Corporate Autoworks on 5195 Harvester Rd. Unit#1 can help you select a wheel that has both the correct diameter and offset for your vehicle. Or, if you really want a specific wheel in spite of the offset difference, your technician may be able to install adapters that will make the wheels fit.

Mounting larger wheels is a more involved process. There are several ways of doing this. You can mount larger wheels but keep the overall tire diameter the same. Or you can “supersize” your tire/wheel combo. Mounting larger wheels while maintaining the same overall tire diameter is the easiest way to increase wheel size. You still need to adjust for offset. Generally, this alteration means that your new tires will be wider than the originals, so you will have to install adapters to keep them from rubbing on the wheel wells. Consult your service advisor at Corporate Autoworks by calling 905-333-9201.

If you want to install larger wheels and increase the overall tire diameter, it is important that the package fits in the wheel well; you may have to do some minor modifications to your suspension. More importantly, you will have to reprogram your vehicle engine's computer to calibrate for the larger tire size. The computer calculates your speed based on the rotation of your tires, so increasing the size of the tires will render it inaccurate. Inaccurate speed calculations can mess up your anti-lock brakes and your stability control systems, as well as your speedometer and odometer.

As you can see, the more modifications you make, the more it becomes important to have your friendly and knowledgeable Corporate Autoworks tire and wheel professional help you with your car care.

If you really want those “super-sized” tires, great: just factor in the issues listed above, plus you may have to have modifications done to your suspension system.

The larger wheels and tires will add weight to your vehicle. This weight is not held up by the suspension system, so is referred to as “unsprung” weight. Adding unsprung weight affects your car differently than just adding loads inside of your car. Unsprung weight can affect acceleration and braking. Putting large wheels on your vehicle may require an upgraded brake system.

Also, you may not get the performance from your vehicle that you've been used to. It may be sluggish when accelerating or harder to handle when turning. You may also find that the ride is bumpier than it was before. Of course, done right at Corporate Autoworks, a good wheel job can sometimes improve a vehicle's ride or performance. It just depends on your vehicle, the type of wheels you choose and what you are hoping to accomplish.

Now let's suppose you want smaller wheels on your vehicle. That should be easier, right? Not really. You still have to worry about offset, and it is important that your computer be reprogrammed to account for calibration issues. And you may need adjustments to your suspension system.

Remember your budget? All of these scenarios require that you shell out some money. Perhaps now you can see why it is good auto advice for Burlington drivers to make that consideration first, before setting their heart on a specific type of wheel.

Another consideration should always be your driving habits. Do you do a lot of off-roading on the outskirts of Burlington? Do you carry heavy loads? Do you tow a trailer on ON roads? All of these factors must be considered when replacing your tires and wheels. Some wheels just may not be up to the work you need them to do.

For example, if you mount large rims on your vehicle, then add low-profile tires to avoid major adjustments to other systems, they won't be able to handle off-roading as well as larger tires. There won't be enough sidewall on the tires to absorb the impact from off-roading. You could end up with dented or broken rims.

At the end of the day, Burlington drivers should always put safety ahead of appearance. That's why you shouldn't add custom wheels to your vehicle without consulting with your Corporate Autoworks tire and wheel professional. Cutting corners when installing custom wheels by not making necessary adjustments to all of the systems impacted by the change can result in dangerous operating conditions as well as repairs down the road.

The friendly and knowledgeable auto professionals at Corporate Autoworks want to remind Burlington drivers of the basics of vehicle safety: preventive maintenance, emergency preparedness and professional repairs. Stay safe, and stay on the road.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com

Fuel Injector Cleaning at Corporate Autoworks

In very simple terms, a fuel injector is a valve that squirts fuel into your vehicle engine. Your engine control computer tells the fuel injector how much fuel to deliver as well as the precise time it should be delivered. Of course this happens thousands of times a minute in every single fuel-injected vehicle driving down Burlington roads.

Most fuel injectors for gas engines are known in the Burlington automotive community as port fuel injectors because they deliver the fuel to a port just outside the cylinder. The fuel pump provides pressure needed to squirt the right amount of fuel into the engine.

A few have recently introduced gas direct injection systems on some engines. They are now available at some ON dealerships. These systems inject the gas directly into the cylinders under very high pressure – many times the pressure of port injection systems.

Although more complicated, direct injection technology promises greater power with improved fuel economy. ON motorists can expect to see more of it in the future.

High temperatures under your vehicle hood and variations in Burlington gas quality cause fuel injectors to be fouled with wax, dirt, water, additives and carbon. Injectors can become partially clogged, preventing them from delivering the proper amount of fuel at the correct pressure.

When injectors are dirty, the fuel doesn't burn as efficiently resulting in poor fuel economy and loss of power. So it's wise for Burlington residents to keep their fuel injectors clean.

Your technician at Corporate Autoworks can perform a fuel system service for you in which the fuel injectors are cleaned so that they operate properly and deliver the right amount of fuel at the right time.

Proper maintenance of your vehicle fuel system means that you will spend less on gas, enjoy strong performance and prevent repair bills down the road.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com

Wash Me, Wash Me Right (How to Wash a Vehicle)

Most would agree they'd rather drive around in a clean, shiny vehicle than one coated with a layer of dirt.  When warmer weather comes around, some of us are bound and determined to wash our own vehicles.  And to protect the paint and its luster, there are a few things to keep in mind when you get out the bucket and soap.

• Cool body.  It's not a good idea to wash a vehicle when the body is hot.  If it's been sitting out in the sun or you've been riding around on a sunny day, make sure you cool your vehicle off by either moving it to the shade or wetting it down with cool water. The problem with washing a hot vehicle is that it's going to dry so fast, minerals in the water can form hard-to-remove spots on the paint.  And some of those can be really difficult to get out.  Best to avoid it.
• Slippery when wet.  Make sure you wet your vehicle down thoroughly before you get the washing mitt out.  Experts keep a couple of buckets of soapy water on hand, and they use soap especially engineered to remove dirt from a vehicle without stripping off the wax that might be on it. 
• The washing mitt.  Experts say to use a mitt with hundreds of moisture-absorbing strands on it.  Start washing at the top and move down.  If you keep dipping the mitt in the buckets frequently, a minimal amount of dirt will stick to it and that will prevent scratching the paint. 
• Wheels last.  Wait until you've finished washing the body before washing the wheels.  Some detailers prefer special wheel-washing tools or brushes. 
• Rinse it well.  Hose the vehicle off thoroughly to get all the soap off, then dry immediately.  Some people swear by a chamois, others like cloth better.  Cotton or microfiber towels will do.  

The next time you have your vehicle in for maintenance, you might ask your service advisor for recommendations on vehicle washing accessories.  They are usually up on the brands that produce the best results.  You may not be a detailing pro, but there's no reason your vehicle can't look like you are.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com