AUTONET TV

Such a Little Part (Climate Control Resistor)

You expect your heater/air conditioner to work like it should.  You have a control for temperature and one for fan speed.  You even have a control for what vents the air comes out of. 

Don't be surprised one day if your blower fan develops a mind of its own and starts going crazy.  Most of the time, you may find that it starts blowing at full speed, and nothing you do to try to control it does any good.  This is what may be happening.

Your blower motor has an electronic component called a resistor.  It does what its name says; it offers resistance.  When you want the fan to run more slowly, you turn the fan speed down.  That resistor accomplishes that by turning its resistance up.  When the resistor fails, the power has nothing to slow it and the fan speeds up. 

It's a small part and can fail due to age or corrosion.  It's usually not an expensive part, either, but it's often found in a location that's not that easy for the technician to get to.  That means labor costs will vary depending on the design of your vehicle. 

Occasionally, a faulty resistor can cause the blower motor not to work at all or only partially come on.  But other things can cause that as well, such as a faulty fan switch or vent control. 

This is where a technician's training comes in.  Special equipment can track down precisely where the issue is so you can be assured the correct part is being replaced.

It's just not pleasant when the blower motor isn't following orders.  Have your service facility check it out so you can be the blower's boss, like it should be. 

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com

Oil Times are a-Changin' (Oil Change Synthetic)

When it comes to oil changes, things are really changing.  Most newer vehicles require synthetic oil, and while it costs more than conventional oil, it doesn't need to be changed as often.

When conventional oil was the only game in town, you changed your oil every 3,000 miles/5,000 km. But as technology in newer vehicles has rapidly changed, so has oil technology.  Synthetics have been around since the seventies.  Even though they start with a conventional oil base, they are engineered in a chemical processing plant with properties that allow them to keep your engine lubricated at very high temperatures.  They are more uniform and consistent.

Synthetic oil doesn't break down as easily, so it lasts longer than conventional oil.  And synthetic oil can flow more easily, even in extremely low temperatures.  As you can see, it has performance advantages at both temperature extremes.

Generally, in recent years automakers have been shipping most of their vehicles with either synthetic oil or a synthetic blend.  Blends are cheaper and have many of the advantages of synthetics.  Another reason synthetic oil is being used in many newer vehicles is its ability to flow more easily improves efficiency.   

It's important to follow your vehicle manufacturer's recommendations when you have your oil changed, so our service adviser can see what options you have for your vehicle. Many newer vehicles come with specific recommendations for synthetic oil. If you live in an area with wide temperature extremes or do a lot of stop-and-go driving, synthetic oil can offer advantages. 

Older vehicles can do fine with conventional oil, but it will have to be changed more than synthetic oil. Also, if you have an older vehicle with more than 75,000 miles/120,000 km on it, it can be more prone to leak and burn oil. Some synthetic oils are designed to protect those high-mileage vehicles better than conventional oil, and yours may benefit. See what your service adviser thinks.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com

Not-So-Smooth Operator (Transmission Signs of Trouble)

You are heading down a flat, newly paved street when all of a sudden you feel it.  Your vehicle jumps a little bit when you're accelerating and changing gears.  You know it's not the surface of the road because it's smooth as silk.  So what did you just feel?

That kind of jumping—or grinding or slipping—during gear changes could be a sign of trouble in your automatic transmission.  And it's important to get it checked out fairly soon because some transmission problems that aren't fixed early can lead to more involved and expensive repairs.

By far most vehicles on the road in North America have automatic transmissions, and they are workhorses.  Unlike early cars with balky, hard-to-shift manual transmissions, the latest automatics allow you to drive without having to even think about gear changes.  But you should know about a few signs of trouble to look for if they ever start showing up.

• When you first get going and shift your vehicle from Park into Drive, do you feel a slight pause?
• How about when you shift into Reverse?  Is there a little lag?
• Does your vehicle sometimes shake when you're traveling down the road?
• Do you smell something burning in your engine compartment?
• Do you hear a clunk when your vehicle shifts?
• Do you have spots of a reddish or brown, oily fluid in the driveway under your vehicle?

If you do, these are worth getting checked out at our service center.  When automatic transmissions start to show signs of wear and age, it can be because of a number of reasons.  They can be caused by your transmission fluid getting old and contaminated, or its level may be low.  The gears can be worn.  You may have a leak somewhere in your transmission.  Or transmission problems might be caused by a computer problem.

Transmission issues aren't always expensive to repair.  Sometimes there may be a leak in a hose or gasket.  Or a computer needs to be reset.  Other issues may be much more involved.  This is why it's important to get your vehicle checked out when you do notice something doesn't feel, look, shift or smell quite right.  Everyone wants their automatic transmission to be a smooth operator.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com

Automotive Tips from Corporate Autoworks: Alignment Inspection

Uneven tire wear, the car pulling to one side or a steering wheel that is off-center are signs for Burlington drivers that their wheels may be out of alignment.

When doing an alignment inspection, the service advisor at Corporate Autoworks will inspect your tires for uneven wear as well as suspension and steering parts for signs of wear or damage. He?ll also compare your current alignment with the vehicle manufacturer?s settings.

Your vehicle owner?s manual will have a recommendation for when to check alignment. Of course, this recommendation is based on normal driving. If you have been in a crash, hit a curb/pothole, frequently drive off-road around Burlington, or notice any symptoms of misalignment, have your Corporate Autoworks service advisor perform an important alignment check.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com