AUTONET TV

For 4x4s (Maintenance of 4x4 Vehicles)

Some people love 4x4 vehicles, the true 4-wheel drive works of engineering like Jeeps and 4x4 pickups that allow you to seemingly go anywhere on the planet. You can climb up a 40-degree rock trail with some planning and skill (always careful to protect the environment, of course), or you can get through the deepest snow.

But with that added capability comes additional complexity, drive-train components and other systems that less capable vehicles don't have.  And that is why when it comes to 4x4s, you have to maintain them a little differently from those vehicles that spend their lives on pavement.  Here are some of the key things to keep an eye on:

• Transfer case—This transfers power from the engine to the wheels.  A transfer case has fluid in it that needs to be changed at intervals recommended by the manufacturer.  Your service advisor will let you know how often that is and will keep track of your service dates.  You will need to make sure the transfer case seal is working properly.  Otherwise, transmission fluid could get in and cause damage that is costly to fix.  Some transfer cases have an electric motor that shifts it through gears, and its connections are often exposed to the elements, making them vulnerable to damage and corrosion.  Proper maintenance will keep those connections working like they should
• Front and rear differentials—These also have to have the right amount of fluid and should be checked regularly.  Your service advisor can let you know when you need that fluid changed as the owner's manual recommends.  It's important the service is performed correctly with the proper lubricant so it will work the way it is designed to.
• Brake lines—Those 4x4s practically beg to go into wet spots. They also are great machines to conquer snow: road salt, brine and all.  Moisture, salt and brake lines are a recipe for corrosion, so brake lines need to be inspected regularly.  There are anti-corrosion sprays or white lithium grease that can retard corrosion.  Remember, getting there is half the fun, but not being able to stop is no fun at all.

So enjoy your 4x4 and what it can do that other vehicles can't.  Just remember that even though it's tough on the outside, it needs special care to keep it going.  Oh, and remember to take care of the environment when you go off-roading, too. 

Steering Clear in Burlington

Those who know vehicles believe the steering system may be the most vital component of them all. Perhaps you've found over the years your steering has gotten loose. Or maybe suddenly, your steering wheel has gotten very hard to turn. Let's steer you in the direction of understanding why this may be happening.

First, loose steering. This can likely be the result of wear and tear on the components that connect the steering mechanism with the wheels. Those parts can be ball joints, Pitman arms or tie rods. These parts take a lot of abuse on the road, thanks to railroad tracks, potholes, uneven surfaces: you name it. It's important that they be checked regularly and maintained at Corporate Autoworks.

Second, the hard-to-turn wheel. Virtually all vehicles on the road have power steering. There are a couple of different types, though, so let's deal with each. By the way, when they fail, your vehicle's steering can suddenly go from easy peasy to really hard to control.

Some vehicles have hydraulic power steering. It uses a hydraulic fluid that can either leak out or become contaminated. When that happens, you can lose that power assist. There's also a belt involved, and if it becomes worn, stretched or cracked (or even breaks), you'll find yourself struggling with the wheel. If you hear a loud whine coming from the area in the engine compartment when you are steering, that could mean your power steering pump is failing. The best way to avoid these problems is regular maintenance.

Recently, manufacturers have been using electric power steering systems that have some advantages over hydraulic systems. They have electric motors that—like everything mechanical—can fail. Sometimes a fuse to the power steering motor will blow, but simply replacing the fuse often doesn't get to the root cause of the problem. A Corporate Autoworks technician can evaluate the system and recommend a solution.

Steering issues are all about safety and should be addressed as soon as possible. When you tell your service advisor, try to be specific about the signs and symptoms. It's one way to steer clear of trouble on the road.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com

No Fueling! (Fuel Filler Location)

If you've ever gotten in an unfamiliar vehicle, maybe a rental car, you may have pulled up to the gas pump and wondered, "Which side is the fuel filler on?" Here's a tip for you.  There is usually a little arrow on the instrument panel near the fuel gauge that points to the side where the fuel filler is. 

But why are the fuel fillers not all on the same side, anyway? There are lots of reasons.  At one time, many manufacturers tried putting them in an easy-to-reach spot: in the center of the vehicle's rear end.  Some even hid them behind a hinged license plate door.  Cool place, but it turned out not to be a good idea.  When a vehicle with a fuel filler in the rear was hit by another vehicle from behind, it was much more prone to catch fire and explode.

Safety regulations now dictate that the fuel filler doors be placed within crumple zones and away from where they can drip fuel on hot exhaust pipes or near electrical connections.  But why do manufacturers put them on either side?

Some say it should be on the side away from the road.  That way if you run out of gas and have to add a little from a gas can as your standing at the side of the road, you'll be a little farther away from passing traffic.  So some companies from North America and many European firms with left-hand drive put their fillers on the right side.

Some manufacturers think convenience for the driver is paramount, so they put their fuel fillers on the driver's side.  If you have a vehicle with a cable release for the fuel door inside the cabin, it's usually on the same side as the steering wheel.  As you can see, there's no standardization.

Fuel doors need regular maintenance such as lubrication, and your gas cap (if your vehicle has one) should seal properly.  Have your service facility inspect those regularly. Wherever your fuel filler is, it's obviously important that you can get at it easily because you have to fuel up sometime. Otherwise, you're not going to go too far!

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com

No Strain, No Gain (The Basics of Oil Filters)

Ever wonder what one of the best things is to ever happen to your vehicle's engine?  It's the little thing that usually looks like a can, the oil filter.

Just like your kitchen sink strainer filters out errant particles of food from clogging your drain, the oil filter cleans out small particles that could cause your engine harm.

Your engine operates in a dirty, hot environment and gathers a lot of tiny contaminants like dirt, dust, little metal shards and unlucky bugs that get sucked in.  Get those things circulating in your engine and those little particles can cause friction, which starts wearing out those finely machined metal parts. 

You know how important it is to change your oil regularly.  It's vital that you change your oil filter at the same time to keep the oil as close to brand new as possible.

Most oil filters look like a metal can with some holes in the bottom.  Inside there are carefully chosen materials that can screen out the contaminants while at the same time allow the lubricating oil to pass through.  Early oil filters had steel wool, metal mesh or actual screens.  Then they tried fabric filters using material such as linen and cotton.  Finally, a less expensive disposable filter using paper and cellulose did the trick.

Cellulose or other synthetic media are used in most oil filters today.  Cellulose is inexpensive and effective.  Fibers filter out particulates and let the oil flow.  The other synthetic media have the ability to screen out even tinier particles while not significantly restricting the oil from getting through.  Engineers continue to work on even more advanced filter material.

Choosing the right oil filter is something our pros at Corporate Autoworks can help you with  because there are a lot of them out there.  Factoring into that decision are your driving habits, how far you drive and the temperatures to which your engine will be subjected.  While some filters will cost more than others, they may be worth it to extend the life of your engine. 

But most important is remembering to come have your oil changed at Corporate Autoworks regularly at the intervals recommended by the vehicle's manufacturer. Just like you wouldn't want to have a plumber come over to fix a clogged kitchen drain, you certainly wouldn't want to have to pay for major engine repairs if they could be prevented by regular oil and filter changes.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com