AUTONET TV

Let?s Shift Gears (Transmission Fluid Replacement)

If you have a vehicle with an automatic transmission, you probably never think about gear shifting.  When motor vehicles were invented, all of them had to be shifted manually.  But that wonderful self-shifting transmission, referred to these days as simply an “automatic,” changed everything.

Automatic transmissions have a lot of moving parts, and they are bathed in a fluid that keeps them lubricated and cool. That fluid also is vital to the whole gear shifting process. 

As you might imagine, the longer that fluid does its job, the more chance it has to pick up some contaminants.  Sometimes a leak will spring up in an automatic transmission.  Dirty transmission fluid or not enough of it will both create problems. It may cause your Check Engine light to come on, or your transmission may run rough and make strange noises.

The best strategy is not to let it get to this point.  That means you should have your transmission fluid replaced at regular intervals. Your vehicle’s manufacturer recommends how often you should have your transmission fluid changed. You should also have the fluid checked at regular intervals to detect if any problems crop up before that recommended interval. They’ll check not only the level but also inspect its condition.

Keep in mind that most automatic transmission problems are caused by overheating. You can reduce your chances of transmission failure by making sure your transmission—and its fluid—is regularly inspected and the fluid is replaced when it needs to be.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com

Why Maintaining Your Windshield Wipers and Washers Matters (Windshield Wiper and Washer Inspection)

What do mud, bird droppings and frost all have in common? When they’re covering your windshield, they can temporarily obscure your view of the road, leaving you driving blind.  And when you can’t see the road clearly ahead of you, it can be really scary. 

That’s one of the reasons it’s important to maintain your windshield cleaning system, which includes your wipers, blades and washers.  They’re three vital components that work together to ensure you’re clearly seeing what’s going on with the road and drivers around you.

Your wipers are doing the physical work on the surface of your windshield’s glass.  The rubber or silicone is what touches the surface of the glass, and after time and exposure to the elements, wiper blades can get brittle, lose their flexibility, rip and tear to the point where they simply can’t clear the glass.  

What holds the wiper blades close to the glass is important, too.  Conventional blades use a metal frame which holds flexible rubber inserts.  Just the inserts can be changed which keeps replacement costs down.

Another type that’s gaining more popularity is called a beam blade.  It doesn’t have a frame but instead has a stiff beam and blade combination.  Beam blades can conform more snugly to the curved glass used in many recent vehicle designs.  Plus they have a sweeping shape which harnesses the pressure of the air that passes over them to apply more pressure during wiping, especially effective at highway speeds. High-tech rubber wiper blades, what …?! Seriously, they are pretty cool.

If you crossed the conventional frame blade with a beam blade, you’d have the hybrid wiper.  It’s constructed like a traditional wiper with a plastic frame that takes advantage of the aerodynamic shape of a beam blade.

Equally important to your windshield is the washer system since wiper blades simply don’t work on dry glass.  The washers use a pump to shoot fluid on your glass to remove debris, dust and other contaminants. 

All these systems need to always be at the ready since we never know what elements we’ll encounter on the road. Regular inspections and maintenance of your wipers and washers can ensure you’ll be able to see far down the road ahead of you for clearer vision and safer traveling.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com

Go With the Flow (MAF Sensor Replacement)

A driver brought her vehicle into the shop the other day and told us how she was getting lousy fuel economy and that the engine was running rough.  Plus, the Check Engine light was on.  Our technician checked the code the engine had generated (why the Check Engine light was on) and found the problem.  It was a faulty Mass Air Flow sensor, MAF sensor for short.

This MAF sensor is an important part of your vehicle.  What it does is calculate the amount of air going into your engine.  As you may know, air is taken into your engine where it's mixed with fuel.  Then, the spark plugs fire, that explosive fuel/air mixture detonates, and all these sequential explosions together provide the power to get your vehicle moving down the road. 

It makes sense that if the MAF sensor isn't sending the engine's computers the correct information on the amount of air going in the engine, the fuel/air mixture isn't going to be right. It will either too rich (too much gasoline for the amount of air) or too lean (not enough gasoline for the amount of air).

In this driver's case, the MAF sensor was damaged and needed to be replaced.  Another thing that may cause the MAF to give an incorrect reading is if its wires are dirty or faulty.  So, replacing or cleaning the wires important as well.

Other symptoms that your MAF sensor is bad? If your engine hesitates when you step on the gas, it stalls, or your vehicle is jerky when you accelerate. 

A malfunctioning MAF sensor is not just bad for performance.  Driving with your vehicle in that condition can cause more damage to your engine.  When you bring your vehicle in for us to check, a technician will thoroughly examine your engine to make sure all issues are taken care of.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com

"Current" Affairs (Blown Fuses)

You may be driving along and find that suddenly your radio stops working.  There are no numbers on the display.  Then when you get home, you notice the garage door opener doesn't do a thing when you press the button. Hmm, this was working just fine this morning.  Are the two problems somehow related?

No, your vehicle doesn't need an exorcism. This has all the signs of an electrical issue, and when you experience symptoms like those, you've probably blown a fuse.  Most vehicles have fuses just like most houses have circuit breakers (some houses still have fuses). They cut the power when it reaches a pre-determined threshold that could cause major damage if it was allowed to continue.  You might say fuses take one for the team.

Most modern automotive fuses are plastic with a thin strip of metal in them designed to melt when a calibrated amount of power passes through.  The philosophy is it's better for an inexpensive fuse to be destroyed than your sound system or your engine's main computer.

It can be tricky to figure out what fuse has blown and why.  Modern vehicles have many computerized electronic components; they can easily be damaged if too much electricity gets to the wrong spot.  At Corporate Autoworks in Burlington, we have technicians trained to trace which fuse has blown and why.

While sometimes a simple fuse replacement will fix the problem, other times there may be some other electrical component that has failed, causing the circuit overload.  Our technicians have special equipment to track down where the power problems are, get to the root of the problem and fix it at the source.

Keep in mind, fuses are there to protect your vehicle. And when they shut down your radio, garage door opener, vanity mirror or anything else, just be thankful they're doing their job. They may have saved you from a much more expensive repair. They've sent an important signal to you about your electrical system.  That's why it's good to keep up with "current" affairs.

Corporate Autoworks
5195 Harvester Rd. Unit#1
Burlington, ON L7L 6E9
905-333-9201
http://www.corporate-autoworks.com